Why Peak Coffee?

With over half a decade of working within the Specialty Coffee industry we don't just come equipped with the knowledge and experience to keep your equipment running in top condition, we can also assist you and your staff in your journey as educated and skilled baristas.

OUR SERVICES

EMERGENCY REPAIR CALL-OUTS

Here For You

We know how crucial your espresso machine is, when equipment fails the result in closing your doors can be detrimental to any business.

We're here to help, whether it's a grinder jammed, water boiler not heating or an espresso machine not working we have the experience and knowhow to get you back up and running and get your doors open.

Fill out the contact form below or simply send an email for general repair services or give us a call if you need a more urgent repair.

Call-outs and the first hour of labour start from £100+vat dependent on location.

PEAK PERFORMANCE
MAINTENANCE CONTRACTS

Giving you peace of mind

The majority of emergency callouts are caused by one of two things. Improper use and a poor cleaning regimes or a lack of regular maintenance.

This is why we offer you an annual service contract to hopefully prevent any unwanted breakdowns of your equipment. We operate this on a monthly payment plan to spread the costs for you and it includes:

Statutory Boiler Inspection and Certification
Water filter installation and annual replacement
A six month service visit on the front end of the machine
Advice on grinder burr replacement
10% discount on callout, labour charges and barista training fees

During all of our visits we will give your machine a health check to nip any issues in the bud and offer advice on cleaning and correct machine operation, allowing you to get the most out of your equipment.

For more information and a bespoke quote please fill out the contact form below with your location, machine make and model and we will be back in touch as soon as possible.

ESPRESSO MACHINE SERVICE

A must for any machine

A healthy machine is a happy machine and a happy machine is reliable.

That is why we believe it is crucial to the success of your business to ensure that your machine is at it's best, reducing the risks of a machine failure impacting your revenue.

During our visit we will strip down, clean and rebuild the steam wands, group heads, solenoid vales and taps. Replacing any relevant seals as part of the service, observe flow rate consistency and machine functionality. We will also advise on any additional parts that may be required to prevent future breakdowns and agree the repair with you before undertaking additional work.

A full machine service can be booked as a single visit or combined with a statutory boiler inspection, as part of our Optimal Performance plan, which will give you multiple visits throughout the year as well as other benefits.

For more information or to book a service please do not hesitate to use the contact form below or the online booking page.

STATUTORY PRESSURE SYSTEM
EXAMINATION
PRESSURE SAFETY SYSTEMS
REGULATIONS 2000 (PSSR)

Keeping you safe and compliant

Under PSSR 2000 pressurised vessels such as espresso machines require to be inspected and deemed to be safe annually.

As the business owner you have a duty of care to hold an up to date boiler safety certificate and Written Scheme of Examination for your espresso machine.

This is where Peak Coffee come in. Our qualified technician, working in partnership with Coffee Safe will attend your site and carry out a full pressure system examination, draw up a report on their findings and providing everything is compliant and the appropriate level of safe operating parameters are met you will then be issued your WSE and certificate of conformity to PSSR 2000.

During the visit your espresso machine steam boiler will be drained and the heating element removed. This allows us to visually check the interior of the boiler using a borescope, we can then easily look closely at welds, structure and any potential concerns. We will also check all the relevant pipe work and boiler supports.

A crucial element to this inspection is testing of the protective devices. Using a calibrated hand pump we test the release pressure of the safety valve, essentially mimicking a machine failure, this ensures that the valve releases under the pre determined steam pressure.

We would recommend aligning this with a water filter cartridge replacement as both require annual renewal.

You can book us to carry out your inspection as a stand alone visit or include it as a part of our optimal performance plan, which spreads the cost and includes preventative maintenance along with other benefits.

For more information or to book please do not hesitate to get in touch with either the contact form below or using our online booking service.

GRINDER BURR REPLACEMENT

Clean - Replace - Calibrate

Use the contact form below to enquire about a grinder burr replacement.

We will come along at a time that suits your business, remove your old burrs, clean your grinder, replace the burrs and grease any threading necessary. Whilst on site we will check over all aspects of your grinder such as clump crushers and capacitors and advise if they require replacement.

We will also help calibrate your grinder to your chosen recipe and leave you with the knowledge required to make your own adjustments.

Please specify the make and model of your grinder when you get in touch to allow us to produce a bespoke quote as quick and efficiently as possible.

BARISTA TRAINING

Working together to create

amazing coffee

With the expected standard of coffee getting higher and higher we believe that it is more important than ever to make sure your baristas are equipped with the knowledge and understanding neccesary to get the best from your coffee.

A fundamental part of successful coffee brewing is grinder calibration and understanding how extraction works and the difference between a thirteen and thirty second short.

This is why we offer tailored barista training sessions for your business covering everything from espresso to plant based milks.

If you are looking to upskill your team and would like to talk about our training services please fill out the contact form and we will be back in touch as quickly as possible.

GET IN TOUCH

Whether you have a current machine issue, service plan enquiry or interest surrounding our other services, we look forward to hearing from you.